You can look in my gallery to see how it sits unloaded. I dont really think i would need any rear blocks. I'm very happy with mine. Question is,do I have to re-alingn the front end?? Im also getting air bags for the rear but still need something in the front. I decided to use the Zone Offroad kit because I wanted the rear blocks too, and they offered everything in one kit.
Im also getting air bags for the rear but still need something in the front. I think they are way over-priced. Need assistance selecting the right Readylift Suspension, Inc. I towed our enclosed a few times and would just pump up the rear to level and go. New fabricated blocks replace your factory block. If you're going with airbags, it shouldn't matter since you can air them up or down to suit you. I dont really think i would need any rear blocks.
After the lift was in I drove it about 1000 miles before alignment. I went with them because I was familiar with Daystar from prev. Their constant commitment to Made in America quality and unique engineering approach gives MaxTrac an industry leading foundation in the aftermarket suspension marketplace. Product is good quality, doesn't make any noise, and I like the fact that they bolt in so that I don't have to worry abo. Thanks to all that responded. Pro Comp was built on the premise of developing the best value-based suspension systems and accessories possible for off-road enthusiasts, and is highly regarded as a leading aftermarket manufacturer. Good product but I wish the spacer would have keyed in the strut instead of just relying on the strength of the bolts.
MaxTrac fabricates front strut spacers that install without disassembling the front struts. If you have pics of what you have in your truck that would be helpful too. Bolting on a MaxTrac Leveling Kit allows your vehicle to retain the same level of ride comfort and you will end up with one to three inches of lift so you now have the extra clearance to put on those larger wheels and tires. I got confused on one part in regards to lowering the axle so I wish they were a bit more detailed in that section. Expect more innovation in the future from MaxTrac.
I see your in Michigan so I could probably meet you half way to save shipping if its not too far. If you have pics of what you have in your truck that would be helpful too. . ReadyLift, built on the principal of developing affordable leveling products, is the preeminent aftermarket manufacturer of leveling kits that allow truck owners to lift and level their vehicles and run bigger tires. With a strong history of innovation, and excellent engineering, you can be sure that your vehicle will perform better by installing Daystar polyurethane suspension components and durable off-road parts.
Sorry for the long reply, but hope this helps. MaxTrack has the best solutions for leveling and lifting your favorite ride. What have you found to be the best??? The design of both kits is nearly identical. What have you found to be the best??? Personally, I think the Readylift is a waste of money. Does Not fit Auto Ride or Auto Leveling models. Install a Daystar Comfort Ride Leveling Kit to give a slight raise to the front and end up with a good looking even stance. Discuss all body modifications and repairs including fenders and bumpers, truck beds and bed-liners, hoods and grilles, or doors and windows.
Worked out really well for us. We're here to help - please call us at 1-800-358-4751. I only had to use the aluminum spacer on the bottom of the strut assembly to achieve the results I was looking for. See product for application and installation details. He aligned it for free but it was barely off. All bed and body related things like bedliners, bed caps and bed rails, or campers and toppers. Daystar has been engineering and manufacturing polyurethane automotive and motorcycle components since 1977.
Skyjacker, built on the principal of developing the best suspension systems and lift kits in the world, is the preeminent aftermarket manufacturer of suspension components that allow truck owners to get off the streets and into the great outdoors with confidence. I've since swapped the truck out for a Suburban so we could fit our growing family and the darn air bags wont fit the Burban suspension. Fits models with factory cast steel or Aluminum control arms. . .
. . . . .
. . . . . .