Position the child safety seat in a seat with a combination lap and shoulder belt. When turning, make wider turns so the trailer wheels will clear curbs and other obstacles. The fuel system may be under pressure. Refer to Lubricant specifications in this chapter. The use of these materials may affect transmission operation and result in damage to internal transmission components.
See your Ford or Lincoln Mercury dealer. The Dispute Settlement Board may not be available in all states. Also use in menu mode to select various settings. Copyright © 2005 Ford Motor Company. This must be done within five seconds of completing Step 1. Notice to owners of pickup trucks and utility type vehicles Utility vehicles have a significantly higher rollover rate than other types of vehicles.
Pull the lever towards you to deactivate. Transmission fluid dipstick automatic transmission 10. This indicates the safety belt is now in the automatic locking mode. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together. The tires may fail and injure a passenger or bystander. It does not include passengers, cargo, or optional equipment.
A child or infant restrained in the center front seat is not at risk of serious injury from the airbags. In the event that there are still programming difficulties, contact HomeLink at www. The high-pressure fluid could penetrate the sealed parts and cause damage. To install the cap, align the tabs on the cap with the notches on the filler pipe. Close the hood and turn off the lamps.
Push down on the child seat while pulling on the loose end of the lap belt webbing to tighten the belt. The vehicle can move forward or backward. Make sure the parking brake is fully set. This is because the back of the infant seat is too close to the inflating airbag and the risk of a fatal injury to the infant when the airbag inflates is substantial. Pull out the old bulb from the socket and push in the new bulb. Clip the tether strap to the anchor as shown.
Your vehicle has larger tires and increased ground clearance, giving the vehicle a higher center of gravity than a passenger car. In the United States, a warranty dispute must be submitted to the. Keep body and door drain holes free from packed dirt. Go to the front of the vehicle and release the auxiliary latch that is located on the front bumper under the grill. Refer to Lubricant specifications in this chapter.
Press again to return to the playing media. Additionally, keeping records during summer and winter will show how temperature impacts fuel economy. Turn off the engine and remove the key. The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it. Power steering fluid reservoir 5.
Allow the safety belt to retract and remove any slack in the belt to securely tighten the child safety seat in the vehicle. Ford is also allowed a final repair attempt in some states. Install a new air filter element into the tray assembly. If you do not install and use the safety seat properly, the child may be injured in a sudden stop or collision. The indicator light on the control will illuminate when activated. Engine oil filler cap 9.
Remove the jumper cable from the ground metal surface. The tire suppliers may have additional markings, notes or warnings such as standard load, radial tubeless, etc. Start the engine, then press the brake pedal and release the parking brake. Adjust your head restraint so that it is located directly or as close as possible behind your head. To install the bed extender, follow the removal procedure in reverse order.